Correlation function apparatus Patent

Circuitry for developing autocorrelation function continuously within signal receiving perio

Ion mass spectrometer

An ion mass spectrometer is described which detects and indicates the characteristics of ions received over a wide angle, and which indicates the mass to charge ratio, the energy, and the direction of each detected ion. The spectrometer includes a magnetic analyzer having a sector magnet that passes ions received over a wide angle, and an electrostatic analyzer positioned to receive ions passing through the magnetic analyzer. The electrostatic analyzer includes a two dimensional ion sensor at one wall of the analyzer chamber, that senses not only the lengthwise position of the detected ion to indicate its mass to charge ratio, but also detects the ion position along the width of the chamber to indicate the direction in which the ion was traveling

Combination ranging system and mapping radar

Transmitter, radiating at a right angle to the spacecraft trajectory and intersecting the surface at a shallow angle, yields accurate radar maps of lunar or planetary surfaces. Earth based station receives the signal reflected from the planetary surface. Mapping coordinates and signal strength are produced by earth based transmitter

DSN observations of Titan

When using Deep Space Station (DSS)-14 in a monostatic configuration, radar observations of Titan show that Titan is a diffuse reflector with a relative radar cross section of 0.14 +/- 0.03. No hot spots were observed

The effect of the interplanetary medium on s-band telecommunications

Effect of interplanetary medium on S-band telecommunication

Quasars as very-accurate clock synchronizers

Quasars can be employed to synchronize global data communications, geophysical measurements, and atomic clocks. It is potentially two to three orders of magnitude better than presently-used Moon-bounce system. Comparisons between quasar and clock pulses are used to develop correction or synchronization factors for station clocks

Method and apparatus for contour mapping using synthetic aperture radar

By using two SAR antennas spaced a known distance, B, and oriented at substantially the same look angle to illuminate the same target area, pixel data from the two antennas may be compared in phase to determine a difference delta phi from which a slant angle theta is determined for each pixel point from an equation Delta phi = (2 pi B/lambda)sin(theta - alpha), where lambda is the radar wavelength and alpha is the roll angle of the aircraft. The height, h, of each pixel point from the aircraft is determined from the equation h = R cos theta, and from the known altitude, a, of the aircraft above sea level, the altitude (elevation), a', of each point is determined from the difference a - h. This elevation data may be displayed with the SAR image by, for example, quantizing the elevation at increments of 100 feet starting at sea level, and color coding pixels of the same quantized elevation. The distance, d, of each pixel from the ground track of the aircraft used for the display may be determined more accurately from the equation d = R sin theta

Cluster: A fleet of four spacecraft to study plasma structures in three dimensions

The four Cluster spacecraft are spin stabilized spacecraft which are designed and built under stringent requirements as far as electromagnetic cleanliness is concerned. Conductive surfaces and low electromagnetic background noise are mandatory for accurate electric field and cold plasma measurements. The mission is implemented in collaboration between ESA and NASA. A Russian mission will be closely coordinated with Cluster

Inviscid analysis of jet injection between two moving streams

An analytical method is developed for determining the flow interaction when a two-dimensional jet is injected between two moving streams. The jet is flowing out of channel and is turned as it enters between the external streams. The local velocity variation resulting from the flow interaction provides a static pressure variation along the jet bounding streamlines that is a priori unknown. Hense, the flow must be obtained by coupling the three flow regions (the jet and the free stream on either side) along the jet boundaries. Both external streams have the same total pressure, which is different from that in the jet. The solution is for the condition that the total pressure in the jet does not differ from the free-stream value by a large amount compared with the free-stream dynamic head. Results are given for the shape of the jet boundaries for various injection configurations